Clearvision are delighted to announce the completion and handover of the first phase of a new build project in Edwalton, Nottingham.
This was carried out by J Tomlinson Ltd based in Beeston, Nottingham based upon the design by DH Squire Consultancy based in Nottingham. Edwalton Business Park will provide detached, two-storey Grade A office buildings of high architectural merit with a real focus on quality and sustainability.
The three units range from 5,500 to 7,000 sq. ft. with generous parking, vaulted ceilings and sustainability at the forefront of the design. The first unit, the largest of the three of the units has been developed for a cutting-edge dental practice The Campbell Clinic and they have opened their doors on schedule.
The luminaires selected for use were our Fillit linear light line fittings (pendant and recessed), with extra length suspension kits for the high-level vaulted areas. The Vespa XL were installed in WC’s and Shower rooms with the Meseta 2 600 x 600 flat panel in various locations, including circulation using the opal diffuser and various offices using the Glare Control optic.
The main entrance is illuminated by our stunning suspended Concept O luminaire, the Tundra was used in the stairwells with the new Richmond 600 x 600 installed into an SAS ceiling in the Dentistry Rooms. The kitchen has utilised our IP65 600 x 600 Pure luminaire and the plant room has our Marmo installed.
Emstars provide the emergency escape lighting whilst the emergency signage was provided via our Salida Exit sign. The lighting controls utilised our stand alone PIR and Microwave units. Externally our Element luminaire was selected around the building perimeter whilst the Car Park and access road are illuminated with our LED Street luminaire mounted on 6mtr columns.
The Fillit Duo is a linear lighting solution, housed in an aluminium extrusion, it has no visible fixings for an attractive minimalist look. The Fillit Duo is able to provide seamless continuous lengths of light. Available in two sizes and a range of lengths and with uplight and downlight, the Fillit Duo its suited to a wide range of applications. L85 @ 50,000 hours. SDCM>3. CRI>80 (CRI>90 available on request).
The Fillit is a linear lighting solution, housed in an aluminium extrusion, it has no visible fixings for an attractive minimalist look. The Fillit is able to provide seamless continuous lengths of light. Available in two sizes and a range of lengths, the Fillit its suited to a wide range of applications. L85 @ 50,000 hours. SDCM>3. CRI>80 (CRI>90 available on request).
The Vespa XL is based around the Philips Fortimo DLM and SDLM module, offering great colour consistency and efficiency. The bezel curves up into the ceiling to provide unobtrusive, low glare lighting. The Vespa XL is available with three outputs and lenses, making it versitile and suitable for almost any space. L85 @ 50,000 hours. SDCM>3. CRI>80 (CRI>90 available on request).
The Meseta is a high efficiency edge lit flat panel luminaire, offering a cost effective alternative to the Spirit, without compromise to its quality. Suitable for neutral spaces with clean lines, this minimalist product complements the space it is situated in. L80 @ 50,000 hours. SDCM>3. CRI>80 (CRI>90 available on request).
The Concept O is a surface, suspended and recessed circular luminaire, it comes in a variety of diameters and colours for creating custom feature lighting. The Concept O offer a combination of great build quality and efficiency making it suitable for a wide range of applications and succesful for creating a feature to any space it is situated in. L80 @ 50,000 hours. SDCM>3. CRI>80.
The Tundra is a circular surface mounted bulkhead luminaire, designed for use in wet rooms and where the integrity of the luminaire is crucial. It features an ABS body in combination with a polycarbonate diffuser complete with securing clips, to allow for ease of maintenance and to ensure the durability of the product. L80 @ 50,000 hours. SDCM>3. CRI>80.
The Pure is an IP65 rated modular luminaire designed for use in the healthcare industry. The Pure offers a combination of great even illumination and efficiency in a range of sizes, at no cost to its integreity. The Pure creates a suitable lighting solution for the the most crucial and demanding environments. L80 @ 50,000 hours. SDCM>3. CRI>80 (CRI>90 available on request).
The Marmo is a non-corrosive industrial style luminaire with polycarbonate body. The Marmo features both IP and IK ratings, offering durability and resistance within difficult working conditions. The lens is secured via snap on stainless steel fixing clips allowing ease of access for maintenance, whilst still maintaining its integrity. L80 @ 50,000 hours. SDCM>3. CRI>80.
The Salida is a modern, high efficiency LED exit sign. The unit comes complete with a minimalist interchangeable legend blade. The Salida is designed to bring an aesthetic element to the exit sign market in addition with its ease of maintenance and installation. The Salida features a special perspex legend blade, glow wire tested to 850°C. SDCM>3. CRI>80.