77 Fulham Palace Road

Clearvision Lighting are proud to announce the completion of an installation at The Foundry, 77 Fulham Palace Road in Hammersmith, London.

The Foundry is a high-end commercial office building set in the heart of Assembly London. It is a new 114,000 sq ft HQ building boasting the largest single floor plates in the area.

The Project concept was designed by TP Bennett Architects and Aecom, utilising a 1,500mm x 300mm air handling version of the Spirit luminaire (used in the main office spaces), the Vespa Xl and Vespa downlights (used in the front of house areas, the lobby/reception and the toilets).

The Project was delivered by the main contractor, Volker Fitzpatrick and electrical subcontractor, Boon Building Services, with Johnathan Hart Associates carrying out the detailed design on behalf of AXA Real Estate and Bell Hammer.

The Clearvision luminaires were selected due to a combination of energy efficiency, the lit aesthetic and build quality, as well as their value for money.

Clearvision worked closely with all parties throughout all stages of the project, ensuring the lighting elements of the project were delivered on time and without incident.

Products Used

The Spirit is a high efficiency luminaire with large luminous surface area, suitable for neutral spaces with clean lines. It creates a uniform environment allowing for wide spacings and adding value to LG7 compliant schemes. The Spirit is an attractive minimalist product with no visible fixings, meaning it complements the space it is situated in. L90 @ 50,000 hours. SDCM>3. CRI>80 (CRI>90 available on request).

Spirit 1200x300

LED Flex is a continuous flexible strip of LEDs encapsulated in a high performance silicone casing, offering up to an IP68 rating. LED Flex is perfect for highlighting key features within a space. It can be customised in length (50mm increments), with a range of dimming and colour options allowing custom designs. L80 @ 50,000 hours. SDCM>3. CRI>80. (CRI>90 available on request).

LED Flex

The Marmo is a non-corrosive industrial style luminaire with polycarbonate body. The Marmo features both IP and IK ratings, offering durability and resistance within difficult working conditions. The lens is secured via snap on stainless steel fixing clips allowing ease of access for maintenance, whilst still maintaining its integrity. L80 @ 50,000 hours. SDCM>3. CRI>80.

Marmo [Vulcan]

The Vespa XL is based around the Philips Fortimo DLM and SDLM module, offering great colour consistency and efficiency. The bezel curves up into the ceiling to provide unobtrusive, low glare lighting. The Vespa XL is available with three outputs and lenses, making it versitile and suitable for almost any space. L85 @ 50,000 hours. SDCM>3. CRI>80 (CRI>90 available on request).

Vespa XL

The Vespa is a recessed downlight with a curved bezel to offer unobtrusive lighting with minimalistic look. The bezel curves up into the ceiling allowing the luminaire to complement the space it is situated in. The LEDs are set back allowing for low glare. GU10 lamp version available upon request. L85 @ 50,000 hours. SDCM>3. CRI>80 (CRI>90 available on request).


The Fillit is a linear lighting solution, housed in an aluminium extrusion, it has no visible fixings for an attractive minimalist look. The Fillit is able to provide seamless continuous lengths of light. Available in two sizes and a range of lengths, the Fillit its suited to a wide range of applications. L85 @ 50,000 hours. SDCM>3. CRI>80 (CRI>90 available on request).

Fillit (Recessed)